A fresh razor blade will take the tint off and then a wax and grease remover will take the glue off. Save yourself some trouble and have a window tint shop remove it. It will cost no more than $20 per window.
Try a hair dryer. When it starts to curl up, peel it off. If that doesn't work, try
using a razor blade scraper.How do you get window tinting off the windows in your car?
get single edge razor blade open door and start to work ever so slowly and corner nearest the interior at bottom edge/ just push easy an go along the the whole front of glass a little at a time until you can lift that portion slightly/this takes patience and a little skill/if you do it right you will be able to pull a large portion of it off in one piece//you have to work the edge
I wet paper towels with ammonia and lay them on the tint for 2 hours and mine came of fairly easy starting at the corners using a razor blade being careful not to get ammonia on anything else and also not scratching the window with the blade it is best to do this on a hot day and keep the paper towels wet with ammonia . To get the excess glue i used simple green then WindexHow do you get window tinting off the windows in your car?
scrape it off with a straight edge razor blade and then the glue backing is left and that's the real fun part, I use engine degreassor to spray on the glue and the razor blade to get it off.
use a razor blade, heat, and a special chemical if needed. Its better to go to a tinting center to remove it since they do it all the time.
No comments:
Post a Comment